DSC PG9933 PowerG Wireless Carbon Monoxide CO Detector

4The PG9933 is a very effective tool to keep you safe from a very dangerous gas. If you have any products in your home that operate on gas, having a Carbon monoxide sensor is a must. The recommended replacement period is 5 years, as the sensor loses sensitivity after that time frame.

---

DSC PG9933 PowerG Wireless Carbon Monoxide CO Detector

The DSC PG9933 is a wireless carbon monoxide detector for use with the DSC PowerSeries NEO and Qolsys IQ Panel 4 systems. Using the new PowerG technology; the PG9933 is a perfect solution if your home or business has any appliance that uses natural gas. This helps with the early detection of dangerous carbon monoxide gas leaks.

The PG9933 measures in at 4.9 x 1.8in and use CR123 Lithium batteries for power. The battery lifespan on these units is a typical 5 years before they’ll need to be replaced. The CO detector weighs in at 7 oz. and it can easily be installed in any space you need detection for CO gas without having to run wires back to the main control panel. The PG9933 features an advanced electrochemical sensor and features an on-board siren and LED indicator that will warn those in the area before dangerous gas levels are reached. It will also send an alarm/trouble signal to the main control panel as well where status can be read on a keypad and possibly send notifications to users to alert them if the system has that capability added. 

Installation Manual
Data Sheet

Features:

Early warning of carbon monoxide (CO) poisoning danger
Visual and Audible alarm indications upon CO detection
Built-in 95db Alarm Buzzer and large flashing LED alarm
Visible and transmitted low battery indication

Specifications: 

Dimensions – 125.3 x 48mm (4.9 x 1.8in)
Battery Life – 5 years (typical use)
Battery Type – One CR123A lithium battery (included)
Weight – 197gr (7oz)
Operating Temperature – 4.4°C to 37.8°C (40°F to 100°F)
Operating Environment – Indoors